Category: Rain Water

  • Rain Water

    Modern Day Rain Water Collection Methods

    Modern Methods Of Collecting Rain Water to Save Fresh Water

    Saving water is very important for the upcoming generation. Unfortunately, many countries are facing a scarcity of water. So to overcome the problem, many companies have started to donate to build rainwater harvesting systems for such areas. However, there is a lack of knowledge for collecting the rainwater as there is rain.

    Rainwater harvesting is the best method to save water and provide them in areas with less water. Commonly there are two types of rainwater harvesting methods: surface run-off and Rooftop rainwater harvesting methods that have been mastered by most companies that offer gutter cleaning in Macon, GA.

    Surface Run-off Rain Water Harvesting

    This technique method is commonly used in urban areas to harvest rainwater. Because in urban areas, the water flows on the surface and gets wasted, they use this method to store rainwater. In this method, water that flows on the land is collected in the tanks under the surface. The collected water is used for irrigation, domestic, and cleaning activities.

    The collected rainwater is stored under the ground, which could lead to evaporation where the area is very hot. But the water in the surface run-off method is stored beneath the surface so the evaporation does not occur. This method is very easy to set up. Adopting this technology properly can earn a profit as it is cost-effective.

    With this method, the demand and requirement of particular will be met accordingly as the main objective of the rainwater harvesting is to provide the water resource to the areas where there is no water. Adopting this method is also beneficial for reducing the risk of water pollution, soil erosion, and flood.

    Roof Top Rainwater Harvesting Method

    It collects the rainwater where it falls like in ponds, lakes, and rivers. In this method, the roof slopes are built up in such a way that they can collect the water and collect in the tanks under the ground. These tanks are set up to supply the house or building that is required water.

    The rainwater can be used for cleaning the house, watering plants, washing, and many other activities. In addition, one can use water this water for other activities and can save the freshwater for drinking and other edible activities. The roof topwater is stored in the artificial rechargeable systems.

    This method can be a little expensive, but there is nothing more valuable than saving water for the future. Furthermore, if the rooftop method is adopted properly, it also helps increase groundwater levels as the main objective of collecting with this method is to save water for future use and improve the quality of groundwater.

    Winding-up

    Nowadays, humans have a wrong attitude towards resources and are continuously wasting resources. However, one must remember that if you waste resources like that only, they won’t come back as natural resources are not built in any workshop. So it is very important to use natural resources wisely and do not waste water. Water as a natural resource is the only reason you can be alive in the future.…

  • Harvesting, Rain Water

    Using local resources and modern day techniques

    Harvesting Rain Water Using Local Resources And Modern Day Techniques

    The purpose of storing the rainwater is to meet requirements whenever resource goes out. With saved resources, you can use them in times of scarcity. You can use the harvested water for agriculture, home, industrial, and irrigation purpose. The natural way to set up rainwater harvesting is to grow fresh-flooded forests. With this method, you can save your expenditure and use unwanted lands.

    Local Resource For Harvesting Rainwater

    • Rooftops

    Setting up a rainwater harvester on the rooftop is a great option. Collected rooftop water can be used for various purposes. When a building has large rooftops provides a large quantity of water to its users.

    • Open Areas

    Open areas like parks, open fields, landscapes, gardens, and many other pavements help collect more rainwater. More the quantity of water it can be used for large areas. It will be beneficial for those areas that have less rainfall.

    • Water Bodies

    Ponds tanks and lakes are the best resources to collect the rainwater. Harvesting water will help meet people’s requirements for different domestic and industrial purposes. Also, help in leveling up the groundwater.

    • Water Drains

    Areas where there is a stormwater drain, provide cost-effective and simple water harvesting as these storm drains contain water that can use for cleaning purposes. Also cost-effective because they are already built-in storm-prone areas.

    Modern Techniques of Rainwater Harvesting

    There are many different methods every county design their rainwater harvesting method suitable for them. Let’s discuss the most common modern techniques:

    • Ground Water Dams

    The most common method of modern-day is groundwater dams. Groundwater dam’s feature is that the water is stored underground but not on the surface. When the water is stored underground, water evaporation is less than the evaporation on the surface. Therefore, when it is too hot, the water will not dry up fastly.

    Parasites breed when water is stored on the surface, but another advantage of groundwater is that they cannot breed in underground water. There is also a subcategory of groundwater dams that are as follows:

    1. Sub-Surface Dam

    The sub-surface dams are built to stop the flow of rocks and sediments that seep the surface water. In addition, it helps reduce the variation level of the groundwater as it can be built underground only.

    1. Sand Storage Dam

    Sand storage dams are built above the surface of the ground. The particle of soil and sand travels when the flow of rain is high. So to sand storage, let all the sand store behind the dam and deposit clean water. When this sand storage is built, they evacuate all the sand, pass clean water to bedrock, and use it for sub-surface dams.

    • Ferro Cement  Tanks

    Ferro Cement tank is another common method used to store rainwater. These are the containers that are cheaper than plastic tanks. The capacity of these tanks is 5000 liters. In addition, the fibro cement tanks can be constructed and repaired easily. The containers have been in use for 25 years and are the most convenient.

    Tanks are pot-shaped containers requiring hessian cloth, GI wire, MS bars, and cement to build. The technology is simple to set up but needs skilled people to build these tanks.

     …

  • Rain Water

    Why Harvesting Rain Water Is Important

    Why Harvesting Rain Water Is Important?

    Since we know that many areas are facing water crises, it is very important to save water. There are different improved methods to save water or reuse it for other purposes. Do you know what rainwater harvesting is? We l, rainwater harvesting is one of the best methods to save rainwater. It is a collection of rainwater from the rooftop stored in tanks, deep pits, or wells.

    The harvesting method is developed so that the water seeps in-ground passing through purifiers or aquifers. So rainwater can be stored when it falls and can be used in times of crisis. There are various purposes for which you can use for domestic, agriculture and commercial purposes. Le’s see how harvested water can be used for different activities:

    Domestic & Industrial Use

    Harvested rainwater can be used in cleaning activities. As the water is from so it not safe for drinking, But you can use it for a different purpose. You can use the water in flushing toilets, watering plants, and cleaning the house. Using rainwater can save the freshwater for cooking food and drinking.

    Well, in industries, rainwater can be used for cleaning purposes. Wh n raw material is delivered in industries before manufacturing, and they need to clean it. So to manufacture good quality products you can use stored rainwater.

    Reduce Your Bills

    When you save rainwater, you can use the water for domestic and industrial use. It will be cost-effective for you. There will be a relaxation on your water and electricity bills. You just have to make a one-time investment for setting up the rooftop and purifiers at your place, and then you can use the water anywhere you want.

    Some companies provide donations for setting up the rainwater harvesting methods as it is a one-time investment. With this method, you can save your other expenses with the advantage of saving freshwater.

    Reduce Risk of Flood

    Rainwater is responsible for soil erosion and other hazards. Wh n you set up a rainwater harvesting system, these problems can also be solved as harvested rainwater seeps into the ground and help to prevent soil erosion. String water can also reduce the risk of stormwater.

    The buildings that have already set up a large water-storing system to collect the water in tanks can reduce the flood problem. Ar as that have a high risk of flood should adopt this method.

    Ground Water Level Increases

    Many areas receive huge rainfall. So this is very beneficial for them to store rainwater. There are some areas where groundwater is used. But due to the lack of rainfall in those areas, the groundwater level decreases.

    So to increase the demand for using groundwater, it is necessary to store rainwater. String water will help in raising the level of groundwater. Hence the productivity of aquifers will increase groundwater and reduce unnecessary usage of freshwater.

    Conclusion

    Nowadays, most countries face a scarcity of resources as natural resources cannot be produced in any workshop. So it is advised for everyone not to waste resources and use the resource wisely.…